Faucet
FF20C
Faucet Filter Replacement Cartridge.
FF20C replacement cartridges fit the FF201 and FF202 faucet filter extenders. Each replacement pack contains two cartridges; the weight of one cartridge is 60 ± 5 g.
Ask about this cartridge- Cartridge model
- FF20C
- Compatible filters
- FF201 / FF202
Turn off the water and follow the replacement steps supplied with your filter.
View compatible filters- Housing material
- ABS
- Pack size
- 2 cartridges
- Weight per cartridge
- 60 ± 5 g
- Replacement interval
- 3–4 months
- Capacity reference
- 6,000 US gallons (approx. 22,700 L)
- Working water pressure
- 0.1–0.2 MPa
- Inlet flow
- 6.0 L/min
- Water temperature
- 5–60°C
Made for your
faucet filter.
Filter media
KDF55, calcium sulfite and scale-control balls are housed in a replaceable ABS cartridge.
Two cartridges per pack
The FF20C replacement pack contains two cartridges. Both fit the FF201 and FF202 faucet filter extenders.
Replacing your cartridge
Turn off the water, remove the filter cover and take out the used cartridge. Insert the new cartridge in the correct direction and tighten the cover. Flush for one minute with warm water at 40–60°C, then adjust the water to a comfortable temperature before washing.
Avoid prolonged exposure to hot water. Replace the cartridge every 3–4 months or after 6,000 US gallons (approx. 22,700 L), whichever comes first. Water quality and use may require earlier replacement.
Read the replacement instructionsFF201 / FF20C
How to replace your cartridge.
- Turn off the water. Unscrew the filter cover and remove the used FF20C cartridge.
- Insert a new FF20C cartridge in the correct direction shown in the illustration.
- Screw the cover back on tightly and check for leaks.
Flush before use
After reassembly, run warm water at 40–60°C (104–140°F) through the filter for one minute to activate and flush the new cartridge. Adjust the water to a comfortable temperature before use.
Replace the cartridge every 3–4 months or after 6,000 US gallons (approx. 22,700 L), whichever comes first. Water quality and use may require earlier replacement.
FF202 / FF20C
How to replace your cartridge.
- Turn off the water. Unscrew the filter cover and remove the used FF20C cartridge.
- Insert a new FF20C cartridge in the correct direction shown in the illustration.
- Screw the cover back on tightly and check for leaks.
Flush before use
After reassembly, run warm water at 40–60°C (104–140°F) through the filter for one minute to activate and flush the new cartridge. Adjust the water to a comfortable temperature before use.
Replace the cartridge every 3–4 months or after 6,000 US gallons (approx. 22,700 L), whichever comes first. Water quality and use may require earlier replacement.